Sony Radio XDR F1HD User Manual

14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
3-292-622-11(1)  
WARNING  
Connecting the system  
Connecting the antenna  
To reduce the risk of fire or electric shock,  
do not expose this apparatus to rain or  
moisture.  
is section describes how to hook up the unit to the  
audio system. Be sure to turn off the power of each  
component before making the connections.  
To connect the AM loop  
antenna  
To reduce the risk of fire, do not cover the ventilation of  
the apparatus with newspapers, tablecloths, curtains, etc.  
And do not place lighted candles on the apparatus.  
To reduce the risk of fire or electric shock, do not expose  
this apparatus to dripping or splashing, and do not  
place objects filled with liquids, such as vases, on the  
apparatus.  
e shape and the length of the antenna is designed  
to receive AM signals. Do not dismantle or roll up the  
antenna.  
FM/AM  
Digital Tuner  
L
ANTENNA  
AM  
FM  
HD Radio™ Technology Manufactured Under License  
From iBiquity Digital Corp. U.S. and Foreign Patents.  
HD Radio™ and the HD Radio logo are proprietary  
trademarks of iBiquity Digital Corp.  
RESET  
R
AUDIO OUT  
1 Remove only the loop part from the plastic  
stand.  
2 Set up the AM loop antenna.  
AUDIO OUT  
(Stereo pin plug)  
(Red) (R)  
AUDIO OUT  
(Stereo pin plug)  
(White) (L)  
Do not install the appliance in a confined space, such as a  
bookcase or built-in cabinet.  
Audio cable (Not supplied)  
What is HD Radio™  
Technology?  
Do not expose the batteries (battery pack or batteries  
installed) to excessive heat such as sunshine, fire or the  
like for a long time.  
Operating Instructions  
HD Radio Broadcasting was approved by the Federal  
Communications Commission in October 2002 as the  
system for digital AM and FM broadcasting in the U.S.  
As the main plug is used to disconnect the unit from the  
mains, connect the unit to an easily accessible AC outlet.  
Should you notice an abnormality in the unit, disconnect  
the main plug from the AC outlet immediately.  
Audio input  
(White) (L)  
Audio input  
(Red) (R)  
3 Connect the cords to the AM antenna  
terminals.  
Cord (A) or cord (B) can be connected to either  
terminal.  
HD Radio technology features include:  
– Static-free, clear radio reception.  
– FM Multicasting – the ability to broadcast multiple  
program streams over a single FM frequency.  
– A variety of “data services,” including text-based  
information – artist name, song title, etc. scrolled  
across your receiver display.  
– Digital broadcasts in the same frequencies as analog  
broadcasts; listeners do not need to learn a new station  
number and todays stations remain at their current  
place on the dial.  
XDR-F1HD  
You are cautioned that any changes or  
modifications not expressly approved in this manual  
could void your authority to operate this equipment.  
Insert the cord while  
pushing down the  
terminal clamp.  
©2008 Sony Corporation  
Printed in China  
ese following indications are located on the bottom  
exterior.  
Notes  
• Install this system so that the power cord can be  
unplugged from the wall socket immediately in the  
event of trouble.  
• If noise occurs, separate the unit from other  
components.  
Only insert up  
to here.  
A
B
• Noise may occur during AM reception if the unit  
is connected to a digital amplifier or a component  
equipped with a digital amplifier.  
HD Radio technology is developed and licensed by  
iBiquity Digital Corporation and supported by the  
leaders of the broadcasting, consumer electronics and  
automotive industries.  
This symbol is intended to alert the  
user to the presence of uninsulated  
“dangerous voltage” within the  
product’s enclosure that may be of  
sufficient magnitude to constitute a risk  
of electric shock to persons.  
Owners Record  
e model number and the serial number are located on the bottom.  
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.  
4 Make sure the AM loop antenna is connected  
firmly by pulling soſtly.  
Model No. XDR-F1HD  
Serial No.________________________________  
Adjusting the AM loop antenna  
Find a place and an orientation that provide good  
reception.  
• Do not place the AM loop antenna near the unit or  
other AV equipment, as noise may result.  
• If you use an external polarized AM antenna, be sure  
to connect the ground cord to the U terminal. e  
supplied AM antenna cord has no polarity.  
Features  
This symbol is intended to alert the user  
to the presence of important operating  
and maintenance (servicing) instructions  
in the literature accompanying the  
appliance.  
• Compact size HD Radio™ tuner unit.  
• Large LCD display to show information about the  
content.  
For customers who purchased this product in the USA  
Proper registration will enable us to send you periodic mailings about new products, services, and other  
important announcements. Registering your product will also allow us to contact you in the unlikely  
event that the product needs adjustment or modification. Thank you.  
• Up to 20 presets for FM and AM stations.  
• Audio-output (Stereo: pin jack.)  
• Full function remote control.  
INFORMATION  
is equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. ese limits are designed  
to provide reasonable protection against harmful  
interference in a residential installation. is equipment  
generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio  
or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the  
following measures:  
Tip  
Adjust the direction of the AM loop antenna for best AM  
broadcast sound.  
Precautions  
• Play the unit on the power source specified in  
“Specifications.  
To connect the FM antenna  
To disconnect the AC power cord (mains lead), pull it  
out by the plug, not the cord.  
• e unit is not disconnected from the AC power  
source (mains) as long as it is connected to the wall  
outlet, even if the unit itself has been turned off.  
• e nameplate, the symbol for CLASS II and the dating  
code are located on the bottom exterior.  
• Do not leave the unit in a location near a heat source  
such as a radiator or airduct, or in a place subject to  
direct sunlight, excessive dust, mechanical vibration, or  
shock.  
• Allow adequate air circulation to prevent internal heat  
build-up. Do not place the unit on a surface (a rug, a  
blanket, etc.) or near materials (a curtain) which might  
block the ventilation holes.  
is unit comes supplied with an FM dipole antenna.  
Connect an antenna that provides good reception to the  
FM antenna terminal.  
FM dipole antenna  
(supplied)  
— Reorient or relocate the receiving  
antenna.  
— Increase the separation between the equipment  
and receiver.  
— Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
• Should any solid object or liquid fall into the unit,  
unplug the unit and have it checked by a qualified  
personnel before operating it any further.  
To clean the casing, use a soſt cloth dampened with a  
mild detergent solution.  
• Never touch the wire of the external FM antenna  
during a thunderstorm. Furthermore, immediately  
disconnect the AC power code from the radio.  
— Consult the dealer or an experienced radio/TV  
technician for help.  
Important Safety Instructions  
1) Read these instructions.  
Adjusting the FM dipole antenna  
Be sure to fully extend the FM dipole antenna. Attach the  
antenna in the shape of a T to a high position on a wall  
away from this unit.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
If you have any questions or problems concerning your  
unit, please consult your nearest Sony dealer.  
Tip  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturers  
instructions.  
If you have poor FM reception, use a 75 coaxial cable  
(not supplied) to connect the unit to an outdoor FM  
antenna as shown below.  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. e wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
Troubleshooting  
Should any problem persist aſter you have made the  
following checks, consult your nearest Sony dealer.  
ANTENNA  
AM  
FM  
Only analog broadcast is received in an HD Radio  
reception area.  
• Depending on the conditions, if the incoming signal  
strength is too weak or unstable, the HD indicator  
will not flash or light up. In that case, the HD Radio  
broadcast will be received as an analog signal.  
Outdoor FM antenna  
10) Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the  
apparatus.  
11) Only use attachments/accessories specified by the  
manufacturer.  
Noise occurs.  
• Ensure that the unit and the antenna are not near a  
digital amplifier or any other components that emits  
noise.  
12) Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid  
injury from tip-over.  
13) Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
 

Sharp Air Cleaner KC C100U User Manual
Sharp Home Theater System 10P02 MA NM User Manual
Sharp Refrigerator SJ 260S User Manual
Sony Blu ray Player BDV L600 User Manual
Sony Camera Accessories ACC CFR User Manual
Sony Video Game Console SCPH 55007GT User Manual
Stamina Products Stepper Machine 40 0069 User Manual
Swann Home Security System SW233 WX2 User Manual
Sylvania Turntable SRCD872 User Manual
Tanaka Blower THB 300 User Manual