Customer Services Bulletin
No Manual Upper Body Calibration
E Series TBT’s
A range of E Series TBT’s (Fig. 1, LED display and Fig. 2, embedded touch screen) with the ADT LCB (PN: 721-1176) will
not be able to perform a manual upper body calibration with the software loaded from the factory.
Fig. 1
Fig.2
The range of serial numbers affected are: CTEN1010-U08841 to CTEN1010-U08941.
If an upper body calibration is needed on one of these units, use the automatic upper body calibration feature.
If a manual upper body calibration is required for the above mentioned serial number range, contact Customer Service at
800-503-1221 or 714-669-1660 or send an email to [email protected] to obtain the software needed to be loaded into
the LCB.
STAR TRAC FITNESS
1 of 1
637-1358 Rev: A
|